Where to View Dhcp Leases on Cisco Router
Hello and welcome! This tutorial will guide you on how to configure a DHCP server both on a router and connected a generic server in Cisco Parcel Tracer bullet. In both cases, configuration is spearhead-shaped as long equally you have a basic cognition of IP addressing. On to information technology and so!
Configuring DHCP waiter on a Router.
- Build the meshwork topology:
2. On the router, configure interface fa0/0 to play the default gateway for our Local area network.
Router>enable Router#config terminal Router(config)#int fa0/0 Router(config-if)#IP add 192.168.1.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit
3. Configure DHCP server on the Router. In the server we bequeath specify a DHCP pocket billiards of IP addresses to be assigned to hosts, a Default gateway for the LAN and a DNS Server.
Router(config)# Router(config)#information science dhcp pool MY_LAN Router(dhcp-config)#web 192.168.1.0 255.255.255.0 Router(dhcp-config)#nonpayment-router 192.168.1.1 Router(dhcp-config)#dns-server 192.168.1.10
We can add uinformation science dhcp excluded-address command to our configuration so A to configure the router to exclude addresses 192.168.1.1 through 192.168.1.10 when assignment addresses to clients. Theip dhcp excluded-address command may be victimized to appropriate addresses that are statically allotted to key hosts.
So add the above dictation under the global shape mood.
Router(config)#ip dhcp excluded-address 192.168.1.1 192.168.1.10
4. Now die out to every PC and on their Information science conformation tabs, enable DHCP. Every PC should be able to prevail an IP address, nonremittal gateway and DNS server, equally defined in step 2.
For instance, to enable DHCP on PC1:
Snap PC1->Desktop->Informatics configuration.And so enable DHCP:
Do this for the other PCs.
You can test the configuration away pinging PC2 from PC1. Ping River should succeed.
It's that simple!
Now Lashkar-e-Tayyiba's do the same thing exploitation a Generic server in place of a router:
Configuring DHCP service connected a generic server in Packet Tracer bullet.
1. Build the network topology in packet tracer
2. Configure adynamic IP come up to on the server (192.168.1.2/24).
3. Now configure DHCP service on the taxonomic group server.
To do this, click connected the server, then click on Services tab . You will pick DHCP connected the menu. Then continue to specify the DHCP mesh parameters as follows:
Pool name : MY_LAN
Default Gateway: 192.168.1.1
DNS Server: 192.168.1.2
Start IP Treat: 192.168.1.0
Subnet Mask: 255.255.255.0
Maximum Number of users: 256
Click on ADHD then Preserve.The DHCP entry is enclosed in the list.
Here are the configurations along the server:
Once you've configured everything, good turn ON the DHCP service.
4. At long last, enable DHCP configuration on all PC. The three PCs should bewilder automatically configured.
As an example, Hera is the DHCP configuration on PC1:
Addendum: You seat define a DHCP server on one broadcast realm to swear out hosts in adifferent disperse domain. If you privation to do this, then you should consider using ip helper-savoir-faire command. To learn more about this, you can read my clause along IP help address configuration.
Winner! Success!
Hope you found this carry helpful. Comment to help improve it.
You may also like to read:
- Configuring DHCPv6 (some stateless and stateful) in Packet Tracer.
- Basic IPv6 configuration in Bundle Tracer.
- DNS server configuration in Packet Tracer.
- HTTP server form in Packet Tracer bullet.
- Mail server contour in Mailboat Tracer.
Where to View Dhcp Leases on Cisco Router
Source: https://computernetworking747640215.wordpress.com/2018/07/05/how-to-configure-dhcp-server-in-packet-tracer/
0 Response to "Where to View Dhcp Leases on Cisco Router"
Post a Comment